South Bend Lathe 1308 Manual

1. South Bend 1308 Lathe Manual
2. South Bend Lathe Parts
3. South Bend Lathe Parts Manual
4. South Bend 1308 Lathe Manual

May 09, 2018. Grizzly Industrial is proud to be the exclusive, worldwide distributor of South Bend Lathe parts! We have dedicated over 50,000 square feet of warehouse space to South Bend parts, and with over 35 years of parts management and expertise you can count on Grizzly to provide a simple, no hassle experience when ordering South Bend Lathe parts. Walking into the factory that makes these South Bend®; lathe chucks, one would be amazed at the plethora of high tech German made CNC machines, Zeiss and Tesa Comparators and other testing equipment made by some of the most respected names in the world. These South Bend®; lathe chucks are amongst the best available on the market.

As early as 1914, South Bend Lathe™ manufactured standard industry 9 inch lathes. In the early 20's, smaller lathes for students and apprentices were introduced, including a 9' Junior lathe, Catalog No. 22. The hole through the spindle, horsepower, and other overall dimensions where the same as the Workshop model, and prices, in 1931, were around $300.

In 1935, the first Workshop lathe was presented in catalogs, along with the standard 9' Series O lathe, and the 9' Junior lathe. It came equipped with a countershaft drive, standard change gears, and a manual apron. Eventually, the Junior lathe line was dropped. And by 1939, the first Workshop lathe became Model C, and South Bend Lathe (TM) added a Model A and Model B Workshop lathes with the following units:

Model A lathes have full quick change gear mechanism for threads and feeds; also automatic apron with friction clutch for operating power cross feeds, and power longitudinal feeds.

Aperio image scope for mac. Model B lathes have independent change gear equipment for threads and feeds, also automatic apron with friction clutch for operating power cross feeds,
and power longitudinal feeds.

Model C lathes, which were manufactured for about four years before the introduction of the Model A and Model B, have independent change gear equipment, lead screw and half-nut power longitudinal feeds and hand cross feed.

Below is a list of South Bend 9 inch and 10K lathes still supported with replacement parts and parts list books. The catalog number is a portion of the number located on the index plate on the gear box of the lathe. The code designation is included in the serial number, which is stamped between the flat- and v-ways on the tailstock end of the bed.

Lathes have been in use for thousands of years and are immensely useful for home and industrial projects; the SouthBend Lathe is no exception. This lathe is actually a series of lathe machines created by the South Bend Lathe company, which has been in operation in various forms since 1906. South Bend Lathe company is known for producing high-quality lathe machines that are valued by those in several types of industry. The company even sells lathes to the US Navy and US Army for their industrial machining needs.

These machines are long-lasting, but occasionally SouthBend latheparts will need replacing. The company makes a point of developing high-quality parts that are easily available for customers to purchase when needed. Each lathe machine also comes with a South Bend lathe manual so that customers can quickly replace damaged or missing parts in their machines.

Characteristics of Lathes

Lathes are used to work on a variety of material including wood, metal, glass and ceramics. These machines can fit on a table top or be so large that they stand alone, such as the

SouthBend lathes range in size from 8 inches on up to 21 inches in length and weigh quite a bit. Even the

Buying Parts for a Used SouthBend Lathe

South Bend has been selling lathes for over one hundred years and their oldest machines still work. In fact, many customers inherit used South Bend lathes from older relatives and express an interest in restoring these machines to use them again, even after long years in storage shed and garages.

SouthBend still sells parts for its older machines, going as far back as those made in the year 1939. Customers can

READProxxon Lathe Review: PD400, PD230E, DB250, Rotary Tools & Lathe Accessories

When SouthBend first got its start, every single machine was handmade and each one was slightly different and unique. All of these machines have a separate serial number that corresponds to a specific card in the company catalog. The cards contain vital information on each and every South Bend lathe for sale on the market today.

SouthBend Lathe Serial Numbers Card Information

Each card for a lathe contains the following information:

� Date Sold

� Sold To Dekho dekho yeh hai jalwa remix mp3 free download.

� Shipped To

� Serial Number

South Bend 1308 Lathe Manual

� Collet Attachment

� Taper Attachment

South Bend Lathe company also sells copies of these cards to customers who wish to keep one on hand for verification purposes. The customers can call in to request the copies using the South Bend lathe serial numbers of their current machines.

What Happens at the Company?

Contacting the company for this information will help customers looking to purchase replacement South Bend latheparts. Once customers have the information from their cards, SouthBend can look up the parts needed in their company catalog to see if any are available.

Specifically, customer representatives ask for the serial number of the customer's machine and look up the right catalog card associated with that machine to determine the proper South Bend lathe manual. The representative will look up the right part number in the manual and enter that number into the computer to locate any parts available in the company warehouse. If the parts needed for the machine are currently on hand, customers can purchase them and have them shipped out for installation. If South Bend doesn't have the parts on hand, customers can still search around online as many other people sell used SouthBend latheparts harvested from old machines.

Typical Parts that Need Replacing

Almost any part on a South Bend lathe will need replacing at some point in its lifetime of use. However, certain parts tend to be more prone to breaking and will need replacing.

• Drive Belts

The drive belt turns the spindle of a lathe, an essential job. Belts like the

• Felt Wipers

SouthBend lathe machines regularly need new felt wipers. These small pieces of felt or wool help regulate oil supply to the bearing surfaces of a lathe machine. They also catch and hold onto dirt particles that can scratch metal. These little felts get soiled pretty quickly with regular use and a machinist always needs a few extra to keep on hand. Each South Bend lathe may use a different kind of wiper, so customers need to look up the serial number of their lathe machine to determine the right wipers to purchase from

• Tool Holders

SouthBend lathes can be used for a number of purposes from turning materials to boring holes and each purpose requires a slightly different tool. Tool holders like the Heavy Duty Boring or Universal Parting Blade holder will diversify the machinist's capabilities when working on a lathe. The

READUnimat Lathe Review Guide: Emco, Sherline & Mini Lathes for Sale

South Bend Lathes

Finding SouthBend latheparts is a cinch when customers look up the information associated with their South Bend lathe serial numbers. Customers can call into South Bend Lathe company to get information about their machine for free and possibly order new parts. If the customer needs to get parts elsewhere many other sellers have a range of parts from older machines available. Getting a lathe machine, no matter how old, up and running is possible with a little effort and a good South Bend lathe manual.

South Bend Lathe Parts

South Bend Lathe Parts Manual

South Bend 1308 Lathe Manual

• AIRCAT 1150 VS NitroCat 1200K: Which One's For You? - July 10, 2019
• Kubota L3901 Tractor Review: The Power and Versatility You Want? - June 30, 2019
• Kubota B2650 Package Deals and MORE You Need to Know - June 30, 2019

Related Posts

• Birmingham Lathe Review: CNC, Lathe Machines, Parts & Accessories

  There are different types of lathe machines, some are specifically made for wood and some…

• Nardini Lathe Guide: Parts, Accessories & Lathes For Sale

  A lathe which is also known as a metal working lathe is one of the…

• Prazi Lathe Guide: SD300, Mini-Lathe & Lathe Mill Combo Reviews

  The purpose of metal lathe is to create individualized precision parts, large scale structures or…